Accessing the router settings using the Netgear router login page is one of the easiest ways to keep tabs on your WiFi network with ease. Not just that but you can also secure your router from unauthorized users. However, sometimes, 70% of users face a lot of issues while using the Netgear router login page. On the off chance, if you have been struggling with the same issue as well, you’ve landed on the right post.
Here, in this piece of writing, we’ve explained all the possible reasons why you are facing Netgear router login issues along with the relevant solutions. Keep scrolling down!
Troubleshooting: Netgear Router Login Page Not Working
-
Connect Your Nighthawk Router to the Modem
First of all, check that the router is connected to your modem. One of the major reasons why the Netgear router login page isn’t working is because your Nighthawk device isn’t connected to the modem. Thus, confirm that your devices are well connected in a wireless manner or using an Ethernet cable. If you are using an Ethernet cable to connect them, ensure that it is free of cuts, damages, and dust. And, if you have connected them wirelessly, ensure that your router is connected to your home network instead of public or free WiFi.
-
Set Your Netgear Router in AP Mode
Yes, you read it right! Setting your Netgear Nighthawk router in AP mode can also help you fix the issue in a fly. Go through the step-by-step instructions highlighted below in order to set your router in AP mode:
- First things first, turn on the Netgear router and connect it to your modem.
- You can either use a wireless or an Ethernet connection to connect your devices
- If you are using an Ethernet connection to connect your devices, make sure that it is free of damages.
- Open an up-to-date web browser on your PC or laptop and before you put it to use, update it.
- Then, access the Netgear Nighthawk setup page using routerlogin.net or 192.168.1.1.
- Navigate to Settings and select the Advanced Setup > AP Mode option.
- At last, click on the Apply button to save the changes.
-
Clear the Cache
The Netgear router login page may not work properly if the internet browser you are using is outdated or loaded with junk files, cache, and browsing history. Thus, clear the cache and make some space by closing the unwanted tabs.
One of the biggest reasons behind the issue can be the use of an incorrect web or IP address. So, cross-check routerlogin.net web address or 192.168.1.1 IP after entering it. Make sure that it is free from any type of typing errors or typos. Also, ensure that you haven’t used the browser’s search bar for entering them. Bear in mind – making use of the search bar for entering routerlogin.net or 192.168.1.1 can somehow let you experience Netgear router login issues.
After following this step, try to open the Netgear router login page and let us know via comments whether this tip proved helpful to you or not.
If the issue still persists, chances are your modem is not enough to provide your router enough internet connectivity to access the Netgear router login page. In that case – we would suggest you add a Nighthawk extender to your router perform Netgear Nighthawk extender setup process and see the difference.
Summing Up
Thus, this was all about how to troubleshoot the Netgear router login not working issue. Anticipating that this piece of writing helped you in fixing the issue. Please share your feedback with us. And for more suggestions regarding the same, feel free to drop us a line.
